What is electrical contractor software?
Electrical contractor software is the field-operations and job-costing system an electrical contractor uses to run work from the field up: crews log time and installed quantities against cost codes, those hours feed the budget and the bill, and the office sees productivity and margin in real time instead of at month-end. The category sits in the field-ops / job-costing cluster — alongside tools like Faraday, Simpro, and BuildOps — distinct from the estimating cluster (Accubid, McCormick, TurboBid) whose output feeds it.
Field PM is purpose-built for this. The hours a foreman captures in a five-minute daily report — or by voice — post against the same cost codes that drive the budget, the productivity index, and AIA G702/G703 billing. No rekeying, no reconciliation.
What Field PM does for electrical contractors
- •Cost-coded daily reports — manhours and installed quantities by cost code, from a phone
- •Productivity tracking — performance factor (PF) and productivity index (PI) by code
- •S-curve and manpower-loading forecasting — see the fade before it costs you
- •AIA G702/G703 progress billing with schedule of values and retainage
- •RFIs, change orders, and cross-tenant GC ↔ sub communication
- •Weld mapping, NDE tracking, and QA/QC hold points for industrial scopes
- •OSHA safety logs, JSAs, and energized-work documentation
- •Estimating-to-field data path — import a bid into a loaded, cost-coded project
- •Two-way accounting sync (QuickBooks, Sage, Xero, NetSuite, Acumatica)
Who it is for
Field PM fits self-perform electrical and specialty-trade contractors — from commercial electrical subcontractors to industrial and utility-scale crews working solar, battery energy storage (BESS), substations, transmission, and oil & gas. It is multi-trade, so the same platform covers mechanical, piping, civil, concrete, and structural self-perform work where it overlaps an electrical scope.
How it compares in the category
For commercial electrical subcontractors, Faraday is the closest electrical-native tool; Field PM matches that field-ops + billing core and adds industrial/utility-scale depth and multi-trade breadth. Against broader platforms, see Field PM vs Simpro, vs BuildOps, and vs Procore — many electrical subs replace a GC-oriented Procore seat with the self-perform field-ops tooling they actually use, at a fraction of the cost.
Frequently asked questions
What is the best software for electrical contractors?+
The best fit depends on your work. For commercial electrical subcontractors, electrical-native field-ops tools like Faraday compete with broader trade platforms like Simpro and BuildOps. Field PM is field operations and job costing software built for electrical and specialty-trade contractors that also reaches industrial and utility-scale work (solar, BESS, substations, oil & gas) and multiple trades — cost-coded field time, productivity, AIA billing, weld mapping, and QA/QC, at published pricing.
What does electrical contractor software do?+
It captures field time and installed quantities against cost codes, tracks productivity (performance factor / productivity index), forecasts labor and margin, handles RFIs and change orders, produces AIA G702/G703 progress billing, and documents safety and QA/QC. The goal is field-to-office cost continuity: the hours your crews log feed the budget and the bill without rekeying.
Is there electrical contractor software built by an electrician?+
Yes — Field PM was built by a licensed electrical contractor with 30 years in the trade across 12+ states. That is why its electrical and industrial workflows (cost-coded field time, weld mapping, NDE, energized-work safety, and an estimating-to-field data path) are first-class rather than generic add-ons.
Can electrical subcontractors replace Procore with it?+
Often, yes. Procore is a GC-oriented platform; many electrical subs pay for far more than they use and still lack self-perform productivity tracking. Field PM gives electrical subs the field-ops and job-costing core they actually need — daily reports, productivity, AIA billing, change orders, GC communication — at a fraction of the cost.
Does it handle industrial and utility-scale electrical work?+
Yes. Beyond commercial work, Field PM is built for industrial and utility-scale scopes — solar, battery energy storage (BESS), substations, transmission, and oil & gas — with weld mapping, NDE tracking, QA/QC hold points, and cost-coded productivity for large self-perform crews.
Electrical contractor software, built by an electrician
30-day free trial · no credit card · unlimited foremen, QA/QC, safety & subs always free.
Start free trial →